| |

Flapper Girl and Selfie Sign, Gatsby Style

A few months ago I had the opportunity to help a friend, that was in charge of “The wedding chapel” for our high school After Prom party.  I was super busy and didn’t get to help her out as much as I had wanted, but I was able to make a Flapper Girl and Selfie Sign.  I guess it was better than nothing. 
Great ideas for a Gatsby themed party!  How to create a life sized silhouette cut out, and a selfie sign.

It was super fun to be involved and even though I didn’t plan on blogging about these projects, I decided to share anyway.

Who knows you might be planning a “Gatsby” themed party…right?!  Or a wedding chapel?  Besides, my friend did an AMAZING job on the room I wanted to brag on her a bit, doesn’t it look AWESOME?!

Flapper Girl and Selfie Sign Gatsby style, wedding chapel
Mr. Tux guy was already built and hanging out in our HS Jam Shed (aka the after prom party shed, which is HUGE and filled with amazing creations, seriously amazing, people work on this thing all year, and they save projects to be used for future years).  The Great Gatsby sign was also made, and I think my friend fixed it up a bit.  In the planning process we decided it would be fun to have a flapper girl to go with Mr. Tux guy.  So I made one.
using a projector to make a life sized cut out of a flapper girl
The first thing I did was find a silhouette of a flapper girl online.  Then I printed it onto a transparency page.  I borrowed my husbands work projector and projected my flapper girl onto the back side of an old wall panel piece (from the Jam shed).

Once I had my projected flapper girl to just a bit shorter than Mr. Tux Guy, which was about 6 feet tall, I proceed to trace around her outline onto the board.   I had to do this in my basement workout room because it was darker down there, it was too light upstairs during the day.  It didn’t take very long either, and I had her copied and ready to cut.  

Life sized cut out of a flapper girl
I want to note that I glued two wall panel boards together to make my flapper girl sturdy, but light.  I used Gorilla Glue (the expandable kind) all over one board then set the other board on top (groove sides together) and used weights to “clamp” them together.  
I suggest using a 1/4 thick material, we were just reusing boards that were in the jam shed, so we didn’t have to spend any money. 🙂  I had photos of the glueing process and cutting out the flapper girl (I did the cutting with a jigsaw) but because I wasn’t going to blog about them I must have deleted them, I looked for them, but they were gone…sorry!
Making a life sized flapper girl cut out stand with scrap wood
Since this Flapper girl needed to stand, I rigged the above method pretty quick with a scrap 1×2 on the back of the flapper girl, and scrap 2×4’s and old gate hinges.  I needed to make it a bit more sturdy than it was, but I had to go to something for my kids, so I passed it onto my friend to have it painted.
making alterations to sturdy up a life sized cut out to stand on it's own
A few people at the jam shed had some suggestions, so I made the above alterations to make it more sturdy, and look better too.  I didn’t like the board off of her flipped up foot, so I was glad to remove it.
Life sized cut out of a flapper girl wearing pearls
Here she is all painted and wearing her pearls!  The only other time I have used a projector was on my Large DIY Bracket (cut out) Frame, it is a fun way to make things on a large scale.  You don’t even have to cut things out, you could just project an image on the wall and paint it!  My Sister and brother in Law did their kids rooms with huge sport logos on the wall, they were pretty cool.

Now, onto how I made the Selfie sign…

stenciling selfie sign with contact paper and gold/glitter paint
Since the room my friend was doing was a wedding chapel she wanted a prop table so the kids could take some fun selfies.  She sent me a gatsby photo booth image and wanted me to make a sign for the table.  I found some fun free Gatsby fonts on the internet and downloaded them to my computer.  Then I used my Cricut Design Space to create this Selfie design.  Once it was created I cut it on my Cricut Explore with contact paper.  I used the stencil to paint my sign with one coat of gold paint and one coat of glitter paint.  
Tips: When stenciling, always load and unload your brush (you want hardly any paint on it).  Also make sure to remove the stencil as soon as you are done with the last coat, the paint will be a little wet, this helps prevent peeling.  If you have touch ups, use a small angled brush.
Selfie sign with gold and glitter paint, grab a prop and strike a pose, without border
When I finished with the sign it just didn’t look finished…it needed…a boarder!
putting a boarder on the selfie sign using scotch blue painter's tape
With a little scotch painter’s tape and more gold and glitter the problem was solved.  I did a large and small stripe to match the selfie lettering.
Seflies grab a prop and strike a pose sign with border
Much better, don’t you think?!
wedding chapel prop table, dresses, tuxes, and hats
They had wedding gowns, tuxes, super cool hats…
selfie props, glases, bow ties, moustaches, pearls
Fun props…
Selfie sign on prop table for wedding chapel
Pearls, flapper headbands, and gold frames!  I am sure the kids had a ton of fun dressing up and taking some great silly shots!
Wedding chapel and car cut out for selfies
Check out the awesome car!  It was from the jam shed too, told you it was filled with cool stuff.  It was the Selfie backdrop, I am sure it made the photos look amazing.
Gatsby wedding chapel
The platform was where the kids were “married” with that awesome tissue paper chandelier was back lit with two strands of waterfall lights that alternated blinking.  It is kind of hard to see from this angle, but the platform has four cardboard columns that were covered in sheers.  The pvc was cross connected at the top of each column to hold the chandelier.  The sheer walls were held up by pvc too.  
Gatsby wedding chapel
With the hanging gold balloons and draped lights it was a magical place!
Gatsby sign with tux guy and flapper girl
I couldn’t be there for the final night because it was the same weekend that I attended the SNAP conference, so I am thankful to my friends who gave these final room shots!  I was super impressed with how it all came together, too bad I couldn’t be in two places at once!

So what do you think, are you up to making a huge cut out or a selfie sign?  Maybe throwing a Gatsby party?

Thanks for stopping by!
Mindi

I will be linking to these parties and Savvy Southern Style

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

6 Comments

  1. Wow! I love this! Your flapper lady is fantastic and the pearls add that little extra touch to make her amazing! Too cool about using your husbands work projector. One could draw / male all kinds of stuff with that. The sign is super awesome! The font is perfect of course! Love the metallic gold and border.

    I'm sure everyone had a blast! Did your friend tell you how the selfie station went?

    Great work, Mindi! 😀

  2. Wow! Everything looks great Mindi! I love flapper girl, and all the other decor is fabulous! Great tips on the stenciling and the border.

    gail

  3. What a brilliant idea! I absolutely love it Mindi! And I bet that they had so much fun with it!!! So very creative and clever…and your sign turned out stunning! Way to go friend! And a lovely long weekend to you and your family! Nicole xo

  4. Super cute! I love the flapper girl and the selfie sign is so fun! Thanks for sharing with SYC.
    hugs,
    Jann

  5. How absolutely adorable and creative! What fun they must have had and what great memories they must have made!
    Thanks so much for sharing at Something to Talk About!
    Karen

  6. Hello Gorgeous! This looks incredible! Thank you so much for sharing it with us. Pinned and tweeted. I hope to see you tonight at 7 pm, so we can party with you! Lou Lou Girls